MFC6490CW Vista Network Connection Repair Instructions
a. Press MENU
b. Scroll up or down to NETWORK, and then press OK.
c.
Scroll up or down to FACTORY RESET, and then press OK.
d. Press 1 for Yes to Reset
e. Press 1 for Yes to Reboot. The machine will reboot automatically.
5. When the machine powers back on:
a. Press MENU
b. Scroll up or down to NETWORK and press OK.
c.
Scroll up or down to WLAN and press OK.
d. Scroll up or down to SETUP WIZARD and press OK.
e. When NETWORK I/F SWITCHED TO WIRELESS is displayed, press OK.
6. The machine will search for your network and display a list of available SSIDs. You should see the
SSID you wrote down earlier. If the machine finds more than one network use the up or down arrow
keys to choose your network, then press OK. Go to step 10. If your access point is set to not
broadcast the SSID you will have to manually add the SSID name. Continue to step 7.
7. Select using up or down arrow and press OK.
8. Enter a new SSID using the keypad then press OK. The SSID must match the settings of your router
or access point. You can use the left and right arrow keys to move the cursor left and right. For
example, to enter the letter a, press the 2 key on the dial pad once. To enter the number 3, press
the 3 key on the dial pad seven times. The letters appear in this order: lower case, upper case and
then numbers.
9. Press up or down arrow to choose INFRASTRUCTURE, and then press OK.
10. Use the up or down arrow, and OK keys to choose one of the options below: If your network is
configured for Authentication and Encryption you must match the settings used for your network.
a. NO AUTHENTICATION OR ENCRYPTION: Scroll to OPEN SYSTEM, and press OK. Scroll to
NONE for Encryption Type and press OK. Then scroll up or down to choose 1 (YES) and press
OK to apply your settings. Go to step 13.
b. NO AUTHENTICATION WITH WEP ENCRYPTION: Scroll to OPEN SYSTEM, and press OK. Scroll
to WEP for the Encryption Type and press OK. Continue to step 11.
c.
AUTHENTICATION WITH WEP ENCRYPTION: Scroll to SHARED KEY, and press OK. Continue
to step 11.
d. AUTHENTICATION WITH WPA/WPA2-PSK (TKIP or AES) ENCRYPTION: Scroll to WPA/WPA2-
PSK, press OK. Go to step 12.
11. Choose the appropriate key number and press OK:
a. Enter the WEP key you wrote down earlier using the dial pad. You can use the left or right
arrow keys to move the cursor. For example, to enter the letter a, press the 2 key on the
dial pad once. To enter the number 3, press the 3 key on the dial pad seven times. The
letters appear in this order: lower case, upper case, and numbers.
b. Press OK when you have entered all the characters.
c.
Press 1 (YES) to apply your settings. Go to step 13.
Note: Most access points and routers can store more than one key, but they will
only use one at any time for authentication and encryption.
12. Scroll to TKIP or AES for Encryption Type and press OK.
a. Enter the WPA/WPA2-PSK Password you wrote down earlier using the dial pad. You can use
the left and right arrow keys to move the cursor. For example, to enter the letter a, press
the 2 key on the dial pad once. To enter the number 3, press the 3 key on your dial pad
seven times. The letters appear in this order: lower case, upper case, and numbers.
b. Press OK when you have entered all the characters.
4
© 1995 - 2010 Brother International Corporation
www.brother-usa.com
Печатать страницу