Fujitsu PRIMERGY TX100 S1 Руководство по выбору - Страница 24
Просмотреть онлайн или скачать pdf Руководство по выбору для Материнская плата Fujitsu PRIMERGY TX100 S1. Fujitsu PRIMERGY TX100 S1 46 страниц. For tx100 s1
Также для Fujitsu PRIMERGY TX100 S1: Технические характеристики (13 страниц), Дополнительное руководство по обслуживанию (46 страниц), Техническое руководство (32 страниц)
Печатать страницу
Extending/replacing the main memory
The table below shows the order in which the memory banks must be equipped:
Mode
single channel
dual channel
Single/dual
1
channel
dual channel
1
Dual-channel mode is activated only if the size of the memory module in DIMM-2A is equal
to the sum of the memory modules in DIMM-1A and DIMM-1B
(for example, DIMM-1A=1 GB, DIMM-1B=1 GB, DIMM-2A=2 GB).
5.2
Extending/replacing the main memory
Ê Open the server (see section
Ê Remove the air duct (see section
Figure 8: Removing a memory module
Ê Press the holders on either side of the mounting location concerned outward
(1).
Ê If the slot was equipped: pull the memory module out of the slot (2).
24
DIMM-1A
DIMM-2A
(black)
(blue)
populated
empty
populated
empty
populated
populated
populated
populated
"Opening the server" on page
Options Guide
DIMM-1B
(black)
empty
populated
populated
populated
"Removing the air duct" on page
Main memory
DIMM-2B
(blue)
empty
empty
empty
populated
17).
22).
TX100 S1