A-Neuvideo HD-44G Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Переключатель A-Neuvideo HD-44G. A-Neuvideo HD-44G 20 страниц. Ethernet (tcp) set up
Также для A-Neuvideo HD-44G: Руководство по эксплуатации (20 страниц), Руководство по эксплуатации (6 страниц)

NEUVIDEO

FRONT PANEL

POWER SWITCH:

The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and

is receiving power. The Switcher will remember that last state during a power cycle. When power is removed and resorted, the last

configuration will be evoked.

INPUT SELECT BUTTONS:

OUTPUT STATUS DISPLAY:

DESTINATION SELECT BUTTONS:

Routing can be Source to Destination or one source to multiple destinations. Example : Press Destination 1,2,4 then press Source 2 will

route Input 2 to Output 1,2,4 respectfully.

EDID MODE SELECT BUTTONS:

IR SENSOR:

The IR sensor receives IR commands from the supplied remote controller or third party IR emitter.

SOURCE SELECT BUTTONS:

FUNCTION KEY - ALL

Input sources (1) to (4) LCM illuminates blue to indicate that a video source is present on that input.

Each Output (destination) Channel shows which input (source) is assigned.

Separate outputs (1) thru (4) select buttons are provided for each destination assignment.

Used to select EDID mode using Input buttons #1 and #2.

Separate inputs (1) thru (4) select buttons are provided each source selection.

Disables (mute) video on all destinations OR Selects the same source to all destinations.

Option 1

- Press ALL followed by OFF button. The display will show " 0 " indicating all destinations

have no video selected.

Option 2

- Press ALL followed by Source 1 thru 4. The display will show the Source selected.

- Press ENTER The pre-set source selection will be assigned all destinations.

FRONT PANEL