Kohler ENGLEFIELD MILANO FS Инструкции по установке - Страница 2
Просмотреть онлайн или скачать pdf Инструкции по установке для Ванны Kohler ENGLEFIELD MILANO FS. Kohler ENGLEFIELD MILANO FS 4 страницы. Solid surface baths
Печатать страницу
MILANO Solid Surface FS Baths
TM
BEFORE YOU BEGIN
Before installing the bath please read these instructions carefully to familiarise yourself with
the required tools, materials and installation sequences. The installation documents included
assume that walls are plumb and floors are level.
In addition to proper installation, read all safety instructions and refer to the Homeowner's
Guide for important care and cleaning information. Ensure that all local building and plumbing
codes are observed. These instructions contain important care, cleaning and warranty
information. Please leave these instructions for the consumer after installation.
IMPORTANT: Before installation please remove the protective packaging from the bath and
inpsect the Milano Solid Surface FS bath and report any damage to us. Installers are
responsible for damage that occurs during installation and no claims for damages will be
accepted once the bath has been installed.
TOOLS AND MATERIALS REQUIRED
Note: Instructions, drawings, and diagrams contained in this manual present information available at the
time of printing. Although every attempt has been made to keep them up-to-date, Englefield reserves the
right to implement product changes without further notice.
CONCRETE SLAB FLOOR PREPARATION - IF APPLICABLE
1) Mark out the drain position and mark out the region in the floor for the drain.
2) Make floor and plumbing preparations as necessary to make space for the drain. It is
recommended to prepare a waterproof layer for the sub-floor.
Minimum
120mm
Minimum
100mm
Maximum
520mm
Page 1
INSTALLATION INSTRUCTIONS
Timber blocks
ENGLEFIELD