Kohler ENGLEFIELD MILANO FS Инструкции по установке - Страница 4
Просмотреть онлайн или скачать pdf Инструкции по установке для Ванны Kohler ENGLEFIELD MILANO FS. Kohler ENGLEFIELD MILANO FS 4 страницы. Solid surface baths
Печатать страницу
MILANO Solid Surface FS Baths
TM
5) Carefully slide the timber blocks out and gently lower the bath into place. Apply an
appropriate silicone sealant, ensuring a watertight seal between the bath and adjacent
surfaces.
CLEANING AND MAINTENANCE INSTRUCTIONS
1) Please refer to the Homeowner's Guide for cleaning instructions.
2) Because baths are often placed on cold floors, and Solid surface baths are sensitive
to thermal shock, it is highly recommende in cold periods, to run in lukewarm water for
a couple of minutes before running hot water. It is recommended the hot water be no
more than 60 C.
3) Light scratches can be removed, if necessary, with very fine sandpaper. It is
recommended to start with 1200 grade followed by 2500 grade. Finally use car cutting
compound to polish the area to recover the gloss surface.
CONTACT AND WARRANTY INFORMATION
NEW ZEALAND
KOHLER NZ LTD
Free Ph: 0800 100 382
Free Fax: 0800 664 488
www.englefield.co.nz
For warranty information, please visit our website.
Installation complete.
AUSTRALIA
KOHLER CO.
Free Ph: 1 800 ENGLEFIELD
(1 800 364 533)
www.englefield.com
Page 3
INSTALLATION INSTRUCTIONS
ENGLEFIELD