Aqua HC 100 Руководство по эксплуатации и техническому обслуживанию - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Водяной насос Aqua HC 100. Aqua HC 100 20 страниц.
Также для Aqua HC 100: Руководство по эксплуатации и техническому обслуживанию (19 страниц)

2.0 TECHNICAL CHARACTERISTICS

2.1 General rules

Install the pump:

 In a Vertical reinforcement (ex: Wall) or on the pump stand (optional) so that

 Far from a hot source in dry places at maximum temperature of 45°C and

 In a ventilated place and easily accessible by an operator for periodical

 At a suitable height above the chemical up to a maximum height of 1.5 meters.

 Do not install the pump over the tank in presence of liquids that emanate fumes

2.2 Standard accessories supplied



1 Foot valve / Strainer.



1 Injection fitting



2 meters opaque PE delivery tubing.



2 meters PVC clear suction tubing.



2 meters PVC clear priming tubing

2.3 Electrical characteristics

Power supply: 230 VAC 50/60 HZ

Upon request (all series)

115 Volt AC 50-60 Hz

Only for series HC1

24/12 Volt DC – 24 Volt AC

2.4 Electric connection CAUTION !!!!!

Verify that the earth system is perfectly functional and complies with the applicable

regulations. Ensure the unit is connected to a circuit protected by a highly sensitive (0.03A)

RCCB circuit breaker. If unsure please consult a competent electrician. Verify that the rated

values of the pump are compatible with those of the mains. Never install the pump directly in

parallel with inductive loads (e.g. motors/solenoid valves) if necessary, use an isolating relay.

There are 2 protection devices inside the pump: a varistor and a fuse.

HC100/N/240717/NW

the pump head stays always in vertical position +/-15°.

minimum 0°C.

maintenance.

If for xigency of the plant it's necessary to install the pump under the level of

the chemical, you need to use an injection valve or an anti siphon valve.

unless it is hermetically closed.

I- Switcher or multi-pole security device

E- Motor or generally inductive charge

ENGLISH

P- Metering Pump

R- Relay

A- Supply voltage