Aqua Computer AQUASTREAM XT USB Руководство по эксплуатации и установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и установке для Водяной насос Aqua Computer AQUASTREAM XT USB. Aqua Computer AQUASTREAM XT USB 20 страниц.
Также для Aqua Computer AQUASTREAM XT USB: Руководство по эксплуатации (16 страниц)

Печатать страницу

aqua

computer

7.4. Connector "aquabus/flow"

Connector for communication with other Aqua Computer devices. For versions

Standard and Advanced, the connector "aquabus/flow" is configured as an

aquabus interface and can be used for instance to connect the pump to an op-

tionally available aquaero fan controller. For these variants, a flow sensor must

not be attached to this connector!

You can use the aquabus/speed signal cable included in delivery to connect the

pump controller board to a suitable connector of a compatible device, for ex-

ample an aquaero. USB and aquabus interface can be used at the same time,

however not all control options of the aquastream XT are available using the

aquabus interface.

If this connector is connected to an aquabus device, the port must not be con

If this connector is connected to an aquabus device, the port must not be con- - - -

figured as flow sensor input! Otherwise, the pump controller will be destroyed and

all guarantees will be void!

For the Ultra variant, this connector can be configured for two different functions.

Default configuration of this connector is an aquabus interface. Using the aqua-

suite software, this connector can also be configured to be a flow sensor input.

Simultaneous use of the aquabus and flow sensor function is not possible! Please

see chapter 14.4. for details on configuring the desired function.

Flow sensor and special interconnecting cable are optional accessories and not in-

cluded in delivery.

Pin assignment:

Pin 1: GND

Pin 2: aquabus SDA / flow sensor +5 V

Pin 3: aquabus SCL / flow sensor signal

Compatible aquabus devices:

aquaero 5 XT (art. 53125 and 53089)

●

aquaero 5 PRO (art. 53090)

●

aquaero 5 LT (art. 53095)

●

Compatible flow sensors:

Flow sensor with 5.6 mm nozzle (art. 53061)

●

Flow sensor "high flow" (art. 53068)

●

Connection cable for flow sensor (art. 53027)

●

7.5. Connector "rpm"

Depending on configuration, this header can be used as a generic speed signal.

The speed signal can be configured (using the aquasuite software, see chapter

13.1.) to be deactivated in case of an alarm condition for monitoring purposes.

For example, the aquabus/speed signal cable included in delivery can be used to

connect this header to the CPU fan header of the PC's motherboard and depend-

ing on the motherboard and BIOS settings, an automatic emergency shutdown

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen

AQUASTREAM XT

- 7 -