Aqua Creek Products EZ Series Руководство - Страница 4
Просмотреть онлайн или скачать pdf Руководство для Подъемные системы Aqua Creek Products EZ Series. Aqua Creek Products EZ Series 11 страниц. Pool lift and hard seat option
Также для Aqua Creek Products EZ Series: Краткое руководство по эксплуатации (2 страниц)
Печатать страницуAnchor Installation: Retro-Fit Concrete
7.
Carefully insert the anchor into the hole. Pour a small amount of 2 part epoxy, or equivalent, around
the anchor. Check that the anchor will sit level or fl ush with the fi nished deck surface.
NOTE: Fill the hole about 1/3 full of 2 part epoxy, or equivalent, prior to inserting the anchor. As
you insert the anchor, rotate it back and forth so that you can evenly distribute the cement
or epoxy around the anchor.
8.
Once anchor is level and fl ush with deck, pour cement or epoxy into the remaining space around
the anchor making sure there are no void spaces. Let cement or epoxy cure for 24 hours (or minimum
manufacturer's recommendations) before installing and using lift.
42"
TO
48"
Copyright © 2019 Aqua Creek Products All Rights Reserved
[30.5 cm] 12" MIN
[51 cm] 20" MAX
[15 cm]
6" MIN
ANCHOR SOCKET
C L
CEMENT/EPOXY
GROUNDING LUG
TOP OF SLAB
[20.3cm]
8" MIN.
FIGURE 1
Revised 11/1/19
4