Aqua Creek Products EZ Series Manual - Página 4

Navegue en línea o descargue pdf Manual para Sistemas de elevación Aqua Creek Products EZ Series. Aqua Creek Products EZ Series 11 páginas. Pool lift and hard seat option
También para Aqua Creek Products EZ Series: Manual de inicio rápido (2 páginas)

Imprimir página

Anchor Installation: Retro-Fit Concrete

Carefully insert the anchor into the hole. Pour a small amount of 2 part epoxy, or equivalent, around

the anchor. Check that the anchor will sit level or fl ush with the fi nished deck surface.

NOTE: Fill the hole about 1/3 full of 2 part epoxy, or equivalent, prior to inserting the anchor. As

you insert the anchor, rotate it back and forth so that you can evenly distribute the cement

or epoxy around the anchor.

Once anchor is level and fl ush with deck, pour cement or epoxy into the remaining space around

the anchor making sure there are no void spaces. Let cement or epoxy cure for 24 hours (or minimum

manufacturer's recommendations) before installing and using lift.

42"

48"

[30.5 cm] 12" MIN

[51 cm] 20" MAX

[15 cm]

6" MIN

ANCHOR SOCKET

C L

CEMENT/EPOXY

GROUNDING LUG

TOP OF SLAB

[20.3cm]

8" MIN.

FIGURE 1

Revised 11/1/19