AVM A 30.3 Руководство по эксплуатации - Страница 13
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Усилитель AVM A 30.3. AVM A 30.3 20 страниц. Integrated amplifier
Также для AVM A 30.3: Руководство по эксплуатации (13 страниц)
Печатать страницу
2 Operation
2.1 First power on / self-test
When the A 30.3 is switched on for the first time, a self-test is performed first, provided that
the unit was previously completely disconnected from the mains using the mains switch (22).
The unit checks the configuration and functionality of the installed components and then goes
into stand-by mode. This process may take a few seconds.
2.2 Switching device on / off
With the on / off button (2) you can switch between operation and stand-by mode. In stand-by
mode, the display is dark and the operation indicator LED (1) lights up. As soon as the machine
is in operation, the operation indicator goes out and the display (6) is activated.
ATTENTION: The device is not completely disconnected from the power supply in stand-by
mode. For complete disconnection from the power supply, press the power switch (22) at the
rear of the device or pull the power cable out of the cold appliance connection (23).
2.3 Input selection
The input selection is done by turning the INPUT source selector (3). Three analog high-level
inputs CINCH (13), one analog high-level input XLR (15), two digital inputs OPT, COAX (16),
one USB B input (14), and one channel for receiving a high-resolution Bluetooth signal are
available.
The currently selected program source is shown in the display (6) on the left side (e.g. IN RCA1,
IN RCA2, RCA3, IN XLR, BLUTOOTH, DIG USB, DIG COAX, DIG OPTO).
2.4 Bluetooth
The integrated Bluetooth function enables the wireless transmission of a music signal from a
Bluetooth-enabled playback device such as a smartphone, tablet or computer. In order to use
the Bluetooth function, an appropriate playback device must first be connected to your A 30.3.
This process is also called Pairing and is done in no time at all.
First select the Bluetooth input with the source selector (3). The display shows ON AIR in the
lower left corner, indicating that the Bluetooth input is active and ready for operation. Then
navigate to the Bluetooth menu of your player. Make sure that the Bluetooth function is
activated and start the search process for available Bluetooth devices in your vicinity. If in
doubt, please refer to the documentation of the respective manufacturer for details on how to
operate the Bluetooth settings on your playback device.
13