AVM A 30.3 Руководство по эксплуатации - Страница 11
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Усилитель AVM A 30.3. AVM A 30.3 20 страниц. Integrated amplifier
Также для AVM A 30.3: Руководство по эксплуатации (13 страниц)
Печатать страницу
Please ensure correct polarity when connecting the speakers. The upper output sockets of the
A 30.3 must be connected to the red speaker terminals or those marked with a plus sign. Right
and left channel must have the same speaker polarity.
1.13 Connection of switching voltages
If an optionally connected power amplifier has a control input, you can connect the switching
signal of the A 30.3 (TRIGGER OUT) to one of the two switching outputs (18). This allows you
to conveniently switch on additional power amplifiers or subwoofers remotely. For details on
the pin assignment of the control socket please refer to section 1.3.
1.13.1 AIR Trigger (AVM Intelligent Remote)
If you have connected a compatible AVM power amplifier model of the MA or SA series as a
separate power amplifier, it can be switched on and off from your A 30.3 using the RCA or XLR
cable connected to one of the two analog outputs (FIX or VARIABLE). You do not need a
separate control cable for this. Please refer to the corresponding documentation regarding the
operating mode of your power amplifier.
1.14 Connecting headphones
The A 30.3 integrated amplifier is equipped with a 6.3 mm jack socket for connecting
headphones (10). Please note that both the preamplifier output VARIABLE (20) and the speaker
outputs (21) are deactivated as long as headphones are connected. The recording output FIX
(19) remains active.
1.15 RC 3 remote control
The included RC 3 remote control made of aluminium allows you to control your A 30.3
comfortably. The ON and OFF buttons are responsible for all AVM devices of a system and
switch them on and off together.
As an alternative to the RC 3 remote control supplied, you can also use the models RC 8 or RC
9 from AVM. These two remote controls allow you to control a wider range of functions and are
available from your dealer for an additional charge.
The keys < INPUT > are used to select the input of an available source, which is shown on the
display of the A 30.3.
Use the < VOLUME > buttons to adjust the desired output volume of the A 30.3. Further buttons
such as < STATION >, < SKIP >, STOP, PLAY serve to control further AVM components. For
example, the STOP, PLAY, and < SKIP > buttons enable control of a CD player. The PLAY key
switches between PLAY and PAUSE when pressed several times - the STOP key ejects the
11