AVM A 30.3 Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Усилитель AVM A 30.3. AVM A 30.3 20 страниц. Integrated amplifier
Также для AVM A 30.3: Руководство по эксплуатации (13 страниц)

Печатать страницу
AVM A 30.3 Руководство по эксплуатации

1.7 Connecting digital signal sources

Connect digital signal sources to either the coaxial or the optical digital input (20) using a
suitable cable. The COAX input is connected to the source devices via 75 Ohm cables, the
OPTO input via optical fiber.
NOTE: Please note that to play back a digital signal, an appropriate source with a compatible
input signal must be present. Otherwise, the message NO DIG SIGNAL will appear on the right
side of the display instead of a volume value.

1.8 Connecting a power amplifier

To connect the A 30.3 to a separate power amplifier, use the analog preamp output VARIABLE
(20). Separate power amplifiers can also be easily connected via the A 30.3 can be switched
on remotely (see section 1.13).

1.9 Installing the Bluetooth antenna

For optimal use of the integrated Bluetooth functions, the Bluetooth antenna included in the
scope of delivery must be connected to the antenna connector (12) on the back of the device.
Please make sure that the antenna is aligned straight when screwing it on. Only then angle the
antenna to the desired position.

1.10 Connecting a recording device

The inputs of a capture device are connected to the analog capture output FIX (19). The outputs
of the recording device can be connected to one of the analog high-level inputs of the A 30.3
(13, 15).

1.11 AV Pass Through (Home Theater Loop)

For integration of the A 30.3 into a home cinema system, the A 30.3 offers an AV Pass Through
function for the high-level inputs RCA2, RCA3 (13) and XLR (15). If this function is activated,
the input signal is reproduced at a fixed level.
NOTE: In addition to the volume control (see section 2.5), the options for adjusting the input
sensitivity (see section 2.6), the balance (see section 2.7) and all sound settings (see section
2.8) of your A 30.3 are disabled.
9