Aqua Free AS DataLog Инструкции по эксплуатации и установке - Страница 2

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и установке для Измерительные приборы Aqua Free AS DataLog. Aqua Free AS DataLog 5 страниц.

Печатать страницу

Safety information

IMPORTANT! To ensure correct operation please read this

information prior to use and follow all instructions carefully

The manufacturer does not accept any liability for damage

incurred by non-compliance with these operating and

assembly instructions. Please store these instructions along

with the "AS DataLog" recorder in the storage case.

Please also follow the correct operating and safety

information for the FLUSH 2.0 system.

CAUTION:

Before installing the recorder system, check that the

flushing system is in perfect technical order.

Assembly and commissioning

The "AS DataLog" recording system should only be assembled

and commissioned by an qualified person. Please use suitable

tools.

NOTE!

The recording system has a battery life of at least two

months.

Using the enclosed test seal, the next date for the battery

to be changed can be documented on the device.

If the battery is not changed in time, data recording is

interrupted. Data saved is not lost and can be evaluated

using the software supplied.

General instructions

3.1 Storage

Dry the individual components prior to storage and deactivate

the electronics by removing the battery. Store the components

of the data recording system in the designated case.

3.2 Disposal

Please dispose of the product packaging in an

environmentally-friendly manner. Do not dispose of the

batteries as household waste. Please hand them in at a

collection point.

The old device must be disposed of correctly in accordance

with Directive 2012/19/EU (WEEE).

Product description

The AS DataLog is a battery operated recording system

which has been specifically designed by Aqua free to detect

and document the flushing cycles of the FLUSH 2.0 system.

The system records this data over a minimum period of two

months with the basis for detecting the flush cycles being

changes in the water temperature. The data is stored inter-

nally and so is not lost when the battery is disconnected.

Data can be downloaded using the USB connection. The

system is set-up and the data is evaluated using the supplied

Windows based software. The software generates a report

in pdf-format which indicates the number of flushes per day,

enabling any deviations to be detected at a glance.

It is also possible to export the recorded flushing data (date,

time and temperature at the end of the flushing time) into a

text file.

Ring sensor

Sensor adapter