DFRobot Light Chaser Руководство - Страница 7

Просмотреть онлайн или скачать pdf Руководство для Продукты для естественно-научного образования DFRobot Light Chaser. DFRobot Light Chaser 14 страниц. Beginner soldering kit

Печатать страницу

4-Soldering Light

Chaser Kit V1

The photodiode is a component that changes a light signal into a

current or voltage signal. It is highly sensitive to light intensity, and

can be used to change a circuit's current. Insert the photodiodes

into the front of the board. Each photodiode has a short leg and a

long leg. The long leg goes into the hole labeled with a long line.

4. Solder the photodiodes

After soldering, cut off the

remaining length of the wire.

Photodiode(S8050)

Place the photodiode into the front side of the board. Then,

bend the photodiode into a 90 degree angle (see picture),

making sure to leave around 25mm at the base of the diode.

Flip the board over and solder the joints.