2Wire HomePortal 1000SW Руководство по установке и поддержке - Страница 7
Просмотреть онлайн или скачать pdf Руководство по установке и поддержке для Шлюз 2Wire HomePortal 1000SW. 2Wire HomePortal 1000SW 15 страниц.
Печатать страницу
Diagnosing Connection Problems
This section describes some connection problems you may encounter with your
HomePortal home network and provides suggestions for solving those problems. If
the problem you are having is not covered here or in the 2Wire online Help system, or
if the suggestions provided do not solve the problem, contact Technical Support.
The
indicator light is not lit
POWER
If the
indicator light is not lit, the HomePortal is not getting power:
POWER
1. Check to see if the power cable is plugged into the power outlet or power strip.
2. If the power cable is plugged into a power strip, make sure the power strip is turned
on.
3. Make sure the power cord is correctly and securely connected into the
HomePortal.
4. Verify that both ends of the power cord are firmly plugged into the brick.
If the
indicator light is red (signifying a system error), or does not light
NOTE:
POWER
after performing the steps above, contact Technical Support.
The
indicator light is red
BROADBAND LINK
If the
BROADBAND LINK
connection to your broadband service provider:
1. Verify that your broadband modem is connected to the HomePortal
port.
MODEM
2. Verify that you have configured the HomePortal with the correct settings (for
example, username and password) provided by your service provider.
3. Verify that your broadband service is activated by calling your broadband service
provider.
The
indicator light is not lit
LOCAL NETWORK
If your networked computers are powered on and the
is not lit, the HomePortal may not have been connected correctly.
indicator light is red, the HomePortal has not established a
5
BROADBAND
indicator light
LOCAL NETWORK