Dell D11S Руководство пользователя - Страница 37

Просмотреть онлайн или скачать pdf Руководство пользователя для Ноутбук Dell D11S. Dell D11S 45 страниц. Small form factor
Также для Dell D11S: Краткое руководство по эксплуатации (2 страниц), Настройка и технические характеристики (35 страниц), Руководство по настройке и техническим характеристикам (35 страниц), Руководство по установке (22 страниц), Настройка и технические характеристики (37 страниц), Руководство по настройке и техническим характеристикам (31 страниц)

Печатать страницу
Dell D11S Руководство пользователя
Table 15. Cloud desktop
Option
Server Lookup Method
Server Name
Server IP Address
Server port
Client Address Method
Client IP address
Client Subnet Mask
Client Gateway
DNS IP Address
Domain Name
Advanced
Table 16. System logs
Option
BIOS Events
Table 17. Advanced configurations
Option
ASPM

Updating the BIOS

It is recommended to update your BIOS (System Setup), on replacing the system board or if an update is available. For laptops,
ensure that your computer battery is fully charged and connected to a power outlet
1
Restart the computer.
2
Go to Dell.com/support.
3
Enter the Service Tag or Express Service Code and click Submit.
Description
Allows you to specify how the cloud desktop software will lookup server addresses.
•
Static
•
DNS (Default)
Allows you to specify the name of the server
Specifies the primary static IP address of the cloud desktop server. The default IP address is
255.255.255.255
Specifies the primary port of the cloud desktop. The default setting is 06910.
Specifies how the client will obtain the IP address.
•
Static IP
•
DHCP (Default)
Specifies the static IP address of the client. The default IP address is 255.255.255.255
Specifies the subnet mask address of the client. The default IP address is 255.255.255.255
Specifies the gateway address of the client. The default IP address is 255.255.255.255
Specifies the DNS IP address of the client. The default IP address is 255.255.255.255
Specifies the domain name of the client.
Allows you to turn on the Verbose mode for advanced debugging. This option is disabled by
default.
Description
Displays the system event log and allows you to:
•
Clear Log
•
Mark all Entries
Description
Allows you to activate the state power management.
•
Auto (Default)
•
Disabled
•
L1 Only
System Setup
37