Dell Inspiron 600m Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ноутбук Dell Inspiron 600m. Dell Inspiron 600m 40 страниц. Hard drive
Также для Dell Inspiron 600m: Начните здесь (2 страниц), Начните здесь (2 страниц), Начните здесь (2 страниц), Руководство по началу работы (2 страниц), Руководство пользователя (34 страниц), Руководство по настройке (2 страниц), Начало работы (2 страниц), Руководство по настройке (2 страниц), Руководство по настройке (2 страниц), Руководство по настройке (2 страниц), Руководство по настройке (2 страниц), Руководство по настройке (2 страниц), Руководство по настройке (2 страниц), Руководство по настройке (2 страниц), Руководство по эксплуатации (41 страниц), Руководство пользователя медиабазы (26 страниц), Руководство по эксплуатации (41 страниц), Установка и настройка (38 страниц), Быстрый старт (2 страниц), Быстрый старт (2 страниц), Быстрый старт (2 страниц), Настройка компьютера (2 страниц), Руководство по эксплуатации (41 страниц), Руководство по эксплуатации (4 страниц)

Dell Inspiron 600m Руководство по эксплуатации
3. If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.
NOTICE:
To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.
 
4. Disconnect any telephone or network cables from the computer.
 
5. Close the display and turn the computer upside down on a flat work surface.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you service the computer.
 
6. Disconnect your computer and all attached devices from their electrical outlets, slide and hold the battery-bay latch release on the bottom of the
computer and remove the battery from the bay, and then press the power button to ground the system board.
 
7. Slide and hold the battery-bay latch release on the bottom of the computer, and then remove the battery from the bay.
1 battery latch release
 
8. Remove any installed PC Cards or blanks from the PC Card slot.
 
9. Remove the Secure Digital memory card, if installed, from the Secure Digital memory slot.
 
10. Remove any installed modules.
 
11. Remove the hard drive.
 Computer Orientation
1
front
2
left
3
back
4
right