Allied Telesis AR400 Series Руководство по быстрой установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Сетевое оборудование Allied Telesis AR400 Series. Allied Telesis AR400 Series 12 страниц. How to set up pppoe between a linux client and access concentrator
Также для Allied Telesis AR400 Series: Как настроить (6 страниц), Руководство по устранению неполадок (8 страниц), Устранение неполадок (5 страниц), Руководство по быстрой установке (8 страниц), Руководство по технике безопасности (18 страниц), Как сделать (8 страниц)

Quick Install Guide

C613-04032-01 REV E

Configuring the Router

AR400 Series routers can be configured via the Command Line Interface (CLI)

or Graphical User Interface (GUI).

Using the CLI to configure a router:

Initiate router start-up.

Using the terminal cable supplied, connect a VT100-compatible terminal,

or the COM port of a PC running a terminal emulation program such as

Windows Terminal, to the Console RS-232 (ASYN0) port on the router's

rear panel.

Set the communication parameters on your terminal or terminal emulation

program to:

•

Baud rate: 9600

•

Data bits: 8

•

Parity: None

•

Stop bits: 1

•

Flow control: Hardware

See the AR Router Hardware Reference for more information on configuring

emulation software.

The log in prompt appears on the terminal or PC. If the log in prompt

doesn't appear, press [Enter] two or three times.

When the router boots for the first time it automatically creates an account

with manager privileges. The account has the log in name "manager" and

the password is "friend". Passwords are case sensitive.

At the log in prompt, enter the log in name and password.

Password: friend

The router's command prompt appears and you can now configure the

router using the command line interface.

Change the password as soon as possible. Leaving the manager account with

the default password is a serious security risk. Make sure you remember the

new password as there is no way to retrieve it if it is lost.

Use the following command to change the account password:

set password

To display a list of help topics, enter:

help

To display help on a specific topic, enter:

help topic

Alternatively, type a question mark (?) at the end of a partially completed

command to see a list of valid options.