Dell DX6012S Руководство пользователя - Страница 37

Просмотреть онлайн или скачать pdf Руководство пользователя для Сервер Dell DX6012S. Dell DX6012S 46 страниц. Rack installation instructions — static rails
Также для Dell DX6012S: Дополнительное руководство (4 страниц), Инструкции по установке оборудования (2 страниц), Руководство по установке и настройке (43 страниц), Руководство по установке и настройке (35 страниц), Руководство по началу работы (28 страниц), Уведомление (28 страниц), Уведомление (20 страниц), Обзор (19 страниц), Руководство по конфигурации (9 страниц), Руководство по конфигурации (9 страниц), Примечание к выпуску (8 страниц), Руководство по конфигурации (7 страниц), Примечание к выпуску (6 страниц), Примечание к выпуску (5 страниц), Информация о выпуске (5 страниц), Руководство по началу работы (47 страниц), Установка (2 страниц), Установка стойки (2 страниц)

Печатать страницу
Dell DX6012S Руководство пользователя
7 To keep the mount path persistent across reboot, add the mount path to
/etc/fstab. For example, run the following command:
vi /etc/fstab
Table 5-2 lists the options that must be selected to create a mount path.
Table 5-2. Options to Create a Mount Path
# device name Mount
Path
/dev/sdb1
/u01
Reinstalling the DX Cluster Services Node
Software

Setting Up and Configuring the Network

The DX Cluster Services Node software requires access to both the external
network and to a dedicated internal network. The internal private network
ensures that the DX Storage Cluster traffic is protected from unauthorized
access and that the external network is isolated from both the PXE boot
server and cluster multicast traffic. The DX Cluster Services Node software
automatically allocates the first half of the Ethernet ports detected on each
NIC interface card to the external network and the second half of the
Ethernet ports detected on each NIC interface card to the internal network.
All NICs allocated to a network are bonded into a bond interface using
mode 6 or balance alb bonding. For example, on a server with four LOM ports
and a quad port NIC adapter, LOM ports 0-1 and NIC adapter ports 0-1 are
allocated to the external network in a balance-alb bond interface and LOM
ports 2-3 and NIC adapter ports 2-3 are allocated to the internal network in a
balance-alb bond interface.
NOTE:
Network switch configuration is outside the scope of the DX Cluster
Services Node software. Switches must be properly configured by a system
administrator to ensure correct connectivity and bonding mode support.
Administrators must not connect the configured internal network ports to the
external network.
fs type
options
ext3
defaults
dump-freq pass-num
1
2
Disaster Recovery
37