Dell Force10 S2410-01-10GE-24P Руководство - Страница 15

Просмотреть онлайн или скачать pdf Руководство для Сервер Dell Force10 S2410-01-10GE-24P. Dell Force10 S2410-01-10GE-24P 42 страницы. Installing the s2410 system
Также для Dell Force10 S2410-01-10GE-24P: Примечание по применению (6 страниц), Краткое руководство по эксплуатации (31 страниц)

Installing the S2410

S2410 systems have no stacking or other optional modules, so, to install the S2410 system, you can

simply install the system on a tabletop, in a rack, or in a cabinet, turn it on, and then connect ports. The

following options are discussed in this chapter:

•

•

•

Supplying Power on page 21

Then see

Where Do I Go from Here?

WARNING: As with all electrical devices of this type, take all the necessary safety precautions to prevent

injury when installing this system. Electrostatic discharge (ESD) damage can occur if components are

mishandled. Always wear an ESD-preventive wrist or heel ground strap when handling the S2410 and its

components.

Tabletop Installation

The S2410 can be positioned on a tabletop. Keep the following in mind when using a tabletop:

• Ensure that your tabletop is stable and can handle the weight of the S2410 (see

on page

27).

• Position the S2410 so that there is proper side ventilation (see

• Position the S2410 so that there is easy access to the rear power inlets, and an unobstructed path

between power inlets and outlets.

Rack or Cabinet Installation

The S2410 provides three rack-mounting methods:

•

Two-Post Rack Mounting on page 16

•

Four-Post Rack-mounting with Threaded Rails on page 17

•

Four-Post Rack-mounting with Cage Nuts on page 19

The S2410 is shipped with two universal front-mounting brackets (rack ears), which are contained in a

bag with 3 Phillips screws for each rack ear. The rack ears must first be attached to the front corners of the

switch before performing any of the rack-mounting procedures presented here.

WARNING: Use only the supplied screws for attaching the rack ears. Longer screws might compromise the

electronics. Shorter or weaker screws might not adequately support the S2410.

Chassis Physical Design

Fans and Airflow on page

Installing the S2410

12).