Allied Telesis AT-9900 Series Функциональное руководство
Просмотреть онлайн или скачать pdf Функциональное руководство для Программное обеспечение Allied Telesis AT-9900 Series. Allied Telesis AT-9900 Series 18 страниц. How to set up pppoe between a linux client and access concentrator
Также для Allied Telesis AT-9900 Series: Как настроить (9 страниц), Как сделать (8 страниц)
Печатать страницу
TM
AlliedWare
Configure Hardware Filters on AT-9900, x900-48,
How To |
and x900-24 Series Switches
Introduction
The AT-9900, x900-48, and x900-24 series switches support a powerful hardware based
packet-filtering facility.
These switches can filter on a range of Layer 2, Layer 3, and Layer 4 packet attributes, and
perform a variety of different actions on the packets that match the filters.
Because the filters are hardware-based, they put no load on the CPU of the switch, and have
no affect on the throughput of the switch. It is possible to configure over 1000 different
filters, and still have complete wire speed throughput on the switch.
The following configuration methods are available:
1.
To filter traffic across all ports on the switch, create dedicated hardware filters.
2.
To filter traffic on a per-port basis, apply filtering actions to QoS flow groups or traffic
classes.
This Note only describes method 1. Method 2 is described in How To Configure Filtering Actions
on QoS Flow Groups and Traffic Classes, available from
literature/howto.aspx.
C613-16058-00 REV C
OS
www.alliedtelesis.com/resources/
www.alliedtelesis.com