Dell PowerVault 221S Уведомление - Страница 3

Просмотреть онлайн или скачать pdf Уведомление для Хранение Dell PowerVault 221S. Dell PowerVault 221S 28 страниц. Dell powervault 220s and 221s systems scsi drive enclosure
Также для Dell PowerVault 221S: Руководство (44 страниц), Обновление микропрограммы (14 страниц), Руководство по эксплуатации (33 страниц)

Push the module to the back of the slot until it is firmly seated in the backplane

connector (see Figure 1).

Using a #2 Phillips-head screwdriver, tighten the captive screw at the top of the

module to secure the module to the chassis.

Connect the host server-to-storage system cable to the Ultra 320 EMM.

Replace the applicable Ultra 160 hard drives with Ultra 320 hard drives.

NOTE: The Ultra 320 enclosure supports a mixture of Ultra 160 and Ultra 320 hard

drives. In an Ultra 320 environment, the hard drives run at their respective speeds. The

hard drives are labeled Ultra 160 (Ultra 3) or Ultra 320 (Ultra 4).

Turn on your storage system.

For information about EMM connections and cabling, see the Installation and

Troubleshooting Guide.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly

forbidden.

Trademarks used in this text: Dell, the DELL logo, Dell OpenManage, and PowerVault are trademarks of Dell Computer

Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and

names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names

other than its own.