Dell PowerVault MD3660i Series Storage Array Руководство по устранению неполадок - Страница 8

Просмотреть онлайн или скачать pdf Руководство по устранению неполадок для Хранение Dell PowerVault MD3660i Series Storage Array. Dell PowerVault MD3660i Series Storage Array 18 страниц. Storage arrays
Также для Dell PowerVault MD3660i Series Storage Array: Руководство по аппаратному и программному обеспечению (25 страниц), Руководство по установке (11 страниц), Руководство по началу работы (10 страниц), Обновление информации (8 страниц), Инструкции по установке стоек (2 страниц), Настройка (2 страниц), Руководство по устранению неполадок (20 страниц), Руководство по развертыванию (24 страниц)

Dell PowerVault MD3660i Series Storage Array Руководство по устранению неполадок

Troubleshooting the Ethernet Management Port

The Ethernet management ports on the MD-series RAID controllers allow you to manage your storage
array via a separate management network from the host server data path (known as out-of-band
management).
Dell recommends always using out-of-band management to manage your storage array.

Locating the Management Port

Each RAID controller module contains a 100/1000 Mbps Ethernet management port. Whether you are
using SAS, iSCSI or Fibre Channel, the management port is located in same same position.
Figure 4 shows the management ports on an MD3600i-series iSCSI storage array.
Figure 4. Management Ports on an MD3600i-series storage array

Default Port IP Addresses

Each port on the storage array is assigned a default, factory-set IP address. Since DHCP is enabled by
default for the management ports at the factory (however, not for the host server ports), these
addresses should be discoverable when the storage array is initially powered on.
Table 1. Default IP Addresses on MD-series storage array (all models)
Port ID
iSCSI port 0
iSCSI port 1
iSCSI port 2
iSCSI port 3
Ethernet
management port
* Port 2 and 3 are available on 1Gb iSCSI MD3200i-series storage arrays only
Controller 0
192.168.130.101
192.168.131.101
*
192.168.132.101
*
192.168.133.101
192.168.128.101
Controller 1
192.168.130.102
192.168.131.102
192.168.132.102
192.168.133.102
192.168.128.102
Subnet mask
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0