Dell PS4110 Руководство пользователя аппаратного обеспечения - Страница 45

Просмотреть онлайн или скачать pdf Руководство пользователя аппаратного обеспечения для Хранение Dell PS4110. Dell PS4110 48 страниц. Storage arrays
Также для Dell PS4110: Руководство пользователя (20 страниц), Руководство по аппаратному обеспечению (50 страниц), Обзор (7 страниц), Установка (2 страниц)

Hardware Owner's Manual

Troubleshooting External Connections

•

Verify that the cables are connected to the correct Ethernet and, if applicable, Management ports before trou-

bleshooting any external devices. For the location of the back-panel connectors on your array, see

Panel Features and Indicators on page

•

Make sure that the power cables are securely attached to the power supply modules on your array.

1. Locate the faulty power supply and determine the status of the LEDs.

If the power LED is not lit, check the power cord and power source into which the power supply is con-

nected.

–

Connect another device to the power source to verify if it is working.

–

Connect the cable to a different power source.

–

Replace the power cable.

If the problem is not resolved, or if the power supply's fault indicator is lit, see

and Customer Service on page

Power supply and cooling modules are hot-swappable.

The array can operate on a single power supply; however both modules must be installed to ensure proper

cooling. A single power supply and cooling module can be removed from a powered-on array for a maximum

of five minutes. Beyond that time, the array may automatically shut down to prevent damage.

2. Reseat the power supply by removing and reinstalling it. See

on page

35.

After installing a power supply, allow several seconds for the array to recognize the power supply

Note:

and to determine if it is working properly.

If the problem is not resolved, see

Check for and correct any of the following situations:

•

Empty drive bays (no drive or drive blank).

•

Ambient temperature is too high. See the Technical Specifications for the array in the Installation and Setup

Guide.

39.

Obtaining Technical Support and Customer Service on page

5 Troubleshooting Your Array

Obtaining Technical Support

Removing a Power Supply and Cooling Module

Back-

39.