Dell PS4110 Donanım Kullanım Kılavuzu - Sayfa 45
Depolama Dell PS4110 için çevrimiçi göz atın veya pdf Donanım Kullanım Kılavuzu indirin. Dell PS4110 48 sayfaları. Storage arrays
Ayrıca Dell PS4110 için: Kullanıcı Kılavuzu (20 sayfalar), Donanım Kılavuzu (50 sayfalar), Genel Bakış (7 sayfalar), Kurulum (2 sayfalar)
Sayfayı Yazdır
Hardware Owner's Manual
Troubleshooting External Connections
•
Verify that the cables are connected to the correct Ethernet and, if applicable, Management ports before trou-
bleshooting any external devices. For the location of the back-panel connectors on your array, see
Panel Features and Indicators on page
•
Make sure that the power cables are securely attached to the power supply modules on your array.
Troubleshooting Power Supply and Cooling Modules
1. Locate the faulty power supply and determine the status of the LEDs.
If the power LED is not lit, check the power cord and power source into which the power supply is con-
nected.
–
Connect another device to the power source to verify if it is working.
–
Connect the cable to a different power source.
–
Replace the power cable.
If the problem is not resolved, or if the power supply's fault indicator is lit, see
and Customer Service on page
Power supply and cooling modules are hot-swappable.
The array can operate on a single power supply; however both modules must be installed to ensure proper
cooling. A single power supply and cooling module can be removed from a powered-on array for a maximum
of five minutes. Beyond that time, the array may automatically shut down to prevent damage.
2. Reseat the power supply by removing and reinstalling it. See
on page
35.
After installing a power supply, allow several seconds for the array to recognize the power supply
Note:
and to determine if it is working properly.
If the problem is not resolved, see
Troubleshooting Array Cooling Problems
Check for and correct any of the following situations:
•
Empty drive bays (no drive or drive blank).
•
Ambient temperature is too high. See the Technical Specifications for the array in the Installation and Setup
Guide.
5.
39.
Obtaining Technical Support and Customer Service on page
5 Troubleshooting Your Array
Obtaining Technical Support
Removing a Power Supply and Cooling Module
Back-
39.
41