Dell Force10 S4810 Руководство по развертыванию - Страница 28
Просмотреть онлайн или скачать pdf Руководство по развертыванию для Переключатель Dell Force10 S4810. Dell Force10 S4810 36 страниц. Dell force10 s4810 switch
Также для Dell Force10 S4810: Краткое руководство по эксплуатации (27 страниц), Руководство по конфигурации (17 страниц), Руководство по конфигурации (17 страниц)
Печатать страницу
controller
Specify the OpenFlow controller configuration that the OpenFlow instance uses to establish a connection.
Z-Series, S4810
Syntax
controller {controller-id}{ip-address}[port port-number]tcp
Parameter
controller-id
ip-address
port-number
port
Defaults
Default port number for the TCP connection is 6633.
Command Modes
OPENFLOW INSTANCE
Command History
Version 9.1(0.0)
Usage
The controller number must be entered as 1 to enable OpenFlow. Currently, only TCP
Information
connection is supported.
Related
openflow of-instance
Commands
debug openflow packets
Enable debugging for OpenFlow packets.
Z-Series, S4810
Syntax
debug openflow packets {packet-type packet-type} of-instance
{of-id}
Parameter
{packet-type
packet-type }
28
Enter the controller number (must be 1).
Enter the IP address of the controller.
Enter the keyword port followed by the port number to use for the
connection. Range is 1 to 65535.
Introduced on Z9000 and S4810.
Create or modify an OpenFlow instance.
Enter the keyword packet-type followed by one of the following
packet types:
all
Enable debugging for all packets.
barrier-reply
Enable debugging for barrier-reply packets.
barrier-request
Enable debugging for barrier-request
packets.
echo-reply
Enable debugging for echo-reply packets.
echo-request
Enable debugging for echo-request packets.
error
Enable debugging for error packets.