Dell Force10 S55 Руководство - Страница 13

Просмотреть онлайн или скачать pdf Руководство для Переключатель Dell Force10 S55. Dell Force10 S55 50 страниц.
Также для Dell Force10 S55: Краткое руководство по эксплуатации (29 страниц)

Печатать страницу

Site Preparations

The S55 is suitable for installation as part of a Common Bond Network (CBN). It can be installed in:

• network telecommunication facilities

• data centers

• other locations where the National Electric Code (NEC) applies

This chapter covers the following topics:

•

Site selection

•

Cabinet placement

•

Rack mounting

•

Grounding

•

Fans and airflow

•

Power

•

Storing components

For detailed S55 specifications, refer to

NOTE: Install the S55 unit into a rack or cabinet before installing any optional components.

Site selection

Dell Force10 equipment is intended for installation in restricted access areas. A restricted access area is

one in which access can only be gained by service personnel through the use of a special tool, lock, key or

other means of security and access is controlled by the authority responsible for the location.

Make sure that the area where you install your S55 chassis meets the following safety requirements:

• Near an adequate power source. Connect the system to the appropriate branch circuit protection as

defined by your local electrical codes.

• Environmental temperature between

• Relative humidity that does not exceed 85% non-condensing.

• In a dry, clean, well-ventilated and temperature-controlled room, away from heat sources such as hot air

vents or direct sunlight.

• Away from sources of severe electromagnetic noise.

• Positioned in a rack or cabinet, or on a desktop with adequate space in the front, rear, and sides of the

unit for proper ventilation, and access.

Chapter 8, S55

Specifications.

32° to 104°F (0° to 40°C)

Site Preparations