Dell Networking S5000 Руководство по конфигурации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по конфигурации для Переключатель Dell Networking S5000. Dell Networking S5000 17 страниц. Data center switch
Также для Dell Networking S5000: Руководство по установке (50 страниц), Руководство по конфигурации (12 страниц), Руководство по началу работы (37 страниц)

FTOS(conf)#no dcb enable

FTOS(conf)#exit

FTOS#copy running-config startup-config

2.4

Configure out of band (OOB) management port

FTOS>enable

FTOS>#config

FTOS(conf)#interface Managementethernet 0/0

FTOS(conf-if-ma-0/0)#no shutdown

FTOS(conf-if-ma-0/0)#ip address ipaddress mask

FTOS(conf-if-ma-0/0)#exit

2.5

FTOS (conf)#management route X.Y.Z.0 /24 A.B.C.1

Note: X.Y.Z.0 is the network your management system is connecting from and A.B.C.1 is the gateway for

the switch. If your management system is on the same subnet as the switch, the previous step may be

omitted. The example above assumes a class C subnet mask.

2.6

FTOS(conf)#username admin password yourpassword privilege 15

FTOS(conf)#enable password yourpassword

2.7

Option 1: You can enable ports individually by entering the port number

FTOS(conf)#interface tengigabitethernet 0/0

FTOS(conf-if-te-0/0)#switchport

FTOS(conf-if-te-0/0)#no shutdown

FTOS(conf-if-te-0/0)#exit

Option 2: You can enable multiple ports at once using the "range" parameter

SCG1007

Dell Networking S5000 Switch Configuration Guide for EqualLogic SANs