Dell S4048-ON Руководство по конфигурации - Страница 15

Просмотреть онлайн или скачать pdf Руководство по конфигурации для Переключатель Dell S4048-ON. Dell S4048-ON 30 страниц. Enterprise switches
Также для Dell S4048-ON: Руководство по конфигурации (19 страниц), Руководство по устранению неполадок (29 страниц)

Switch configuration (OS 9.x)

2.4

Optional stack configuration

Note: If choosing to use a stack configuration instead of LAG, follow the instructions in this section instead of

those in section 2.1.

One advantage of stacked switches is that they can be managed as a single switch. However, firmware

updates will update all members of the stack simultaneously and therefore should only be done during

planned downtime.

2.4.1

Dell>enable

Dell#delete startup-config

Proceed to delete startup-config [confirm yes/no]yes

Dell#reload

System configuration has been modified. Save? [yes/no]no

Proceed with reload [confirm yes/no]yes

Note: The switch will reboot.

2.4.2

Dell>enable

Note: After the startup configuration is deleted, the factory default enable mode password is calvin.

Dell#configure

Dell(conf)#stack-unit 1 priority 1

Dell(conf)#stack-unit 1 stack-group 12

Dell(conf)#stack-unit 1 stack-group 13

Dell(conf)#exit

Dell#copy running-config startup-config

Dell#reload

2.4.3

Dell>enable

Dell#delete startup-config

Proceed to delete startup-config [confirm yes/no]yes

Dell#reload

System configuration has been modified. Save? [yes/no]no

Proceed with reload [confirm yes/no]yes

Note: The switch will reboot.

Dell EMC Networking S4048-ON Switch Configuration Guide for Dell PS Series SANs | SCG1026