Dell S4148-ON Руководство по конфигурации - Страница 17

Просмотреть онлайн или скачать pdf Руководство по конфигурации для Переключатель Dell S4148-ON. Dell S4148-ON 19 страниц. Dell emc sc series sans

Reverting from DCB to non-DCB configuration (optional)

4.4

Revert to default VLAN ID on switch and arrays

Once DCB is disabled on the switch, the SC Series arrays will no longer use the VLAN ID that was configured

when DCB was enabled. The arrays will revert to the default or native VLAN. Therefore, a valid VLAN must

be configured for all host servers, switches, and SC Series array members. A valid VLAN can use the default

or native VLAN ID (typically 0 or 1), or a specific VLAN can be configured (for example, VLAN 100). If a non-

default VLAN is configured, any ports connected to the arrays must be configured as untagged.

The steps in section 4.3 revert the switch ports to default native vlan 1. Use the following command to remove

VLANs other than vlan 1 from the switch configuration.

OS10(config)# no interface vlan <vlan-id>

4.5

OS10(config)# no policy-map type queuing <queuing-policy-name>

OS10(config)# no class-map type queuing <LAN-traffic-map-name>

OS10(config)# no class-map type queuing <iSCSI-traffic-map-name>

OS10(config)# system qos

OS10(config-sys-qos)# no ets

OS10(config-sys-qos)# no service-policy input type qos <trust-policy-map-name>

OS10(config-sys-qos)# no service-policy type application <qos-policy-map-name>

OS10(config-sys-qos)# exit

OS10(config)# no policy-map type network-qos <policy-map-name>

OS10(config)# no policy-map type qos <trust-policy-map-name>

OS10(config)# policy-map type application <qos-policy-map-name>

OS10(config-pmap-application)# no class <qos-class-name>

OS10(config-pmap-application)# exit

OS10(config)# no qos-map traffic-class <queue-map-name>

OS10(config)# no class-map type network-qos <iSCSI-class-map-name>

OS10(config)# no class-map type application <qos-policy-map-name>

OS10(config)#

4.6

OS10(config)# iscsi enable

OS10(config)# iscsi session-monitoring enable

OS10(config)# exit

4.7

OS10# copy running-configuration startup-configuration

17 Dell EMC Networking S4148-ON and S4128-ON Switch Configuration Guide for Dell EMC SC Series SANs | SCG3704