AVYCON AVC-PHN61FLT Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Камера безопасности AVYCON AVC-PHN61FLT. AVYCON AVC-PHN61FLT 2 страницы. Hd network fisheye camera
Печатать страницу
③ Route and connect the cables.
④ Fix the camera to the wall with screws as shown below.
⑤ Install the fixed ring back to the camera.
• Install Camera with Junction Box
① Remove the fixed ring from the gap of the camera (see Install SD Card ①).
② Install the junction box onto the wall
③ Route the cables through the cable hole (take side conduit cabling
for example.) and connect the cables. Then fix the camera onto the junction
box with screws.
④ Install the fixed ring back to finish the installation.
5. IE Network Connection
Here we take accessing the device via LAN for example. In LAN, there are two
ways to access.
1. Access through IP-Tool;
2. Directly Access through IE Browser
The default network settings are as shown below:
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
You may use the above default settings when you log in the camera for the
first time.
Switch
Network Cable
IPC
Router
• Access through IP-Tool
2. Directly Access through IE Browser
① Make sure that the camera and the PC are well connected via LAN.
② Find the IP-Tool from the CD and then install it in the computer.
After that, run the IP-Tool as shown below.
Device Network Search
Immediate Refresh
Device Name Device Type
Product Model
IP Address
Http Port
Data Port
name
IPC
unknown
192.168.226.201
80
9008
name
IPC
unknown
192.168.1.2
80
9008
name
IPC
unknown
192.168.1.3
80
9008
Total Device: 3
Local IP Address:192.168.1.4
Subnet Mask:255.255.255.0 Gateway: 192.168.1.1
③ Modify the IP address. The default IP address of this device is 192.168.
226.201. Click the information of the camera listed in the above table to
show the network information on the right hand. Modify the IP address
and gateway of the camera and make sure its network address is in the
same local network segment as that of the computer. Please modify the
IP address of your camera according to the practical situation.
For example, the IP address of your computer is 192.168.1.4. So the IP
address of the camera shall be changed to 192.168.1.X. After modification,
please input the password of the administrator and click "Modify" button
to modify the setting. The default password of the administrator is
"123456".
HTTP: 80
Data Port: 9008
④ Double-click the IP address and then the system will pop up the IE
browser to connect IP-CAM. Download the Active X control and run it
in the computer. Then input the user name and password in the login
interface.
Network Cable
MENU
Computer
The default username is admin; the default password is 123456.
• Direct Access Through IE
About
① Make sure that the camera and the PC are well connected via LAN.
Subnet
Modify Network Parameter
② Find the IP-Tool from the CD and then install it in the computer.
255.255.
Mac Address
CE :98 :23 :75 :35 :22
255.255.
IP Address
192 .168 . 226 . 201
After that, run the IP-Tool
255.255.
Subnet Mask
255 . 255 . 255 . 0
③ Modify the IP address and make sure its network address is in the
Gateway
192 .168 . 226 . 1
same local network segment as that of the computer.
Modify
④ Open IE browser and input the modified IP address in the address
i
Tip: Enter the administrator password, and
then modify the network parameters.
bar to log in the IE client. If it is the first time for you to log in, you
Restore IPC Default Configuration
should download the Active X control and run it in the computer.
After that, input the default user name and password to login.
DNS：210.21.196.6
Modify Network Parameter
CE :98 :23 :75 :35 :22
Mac Address
IP Address
192 .168 . 1 . 201
Subnet Mask
255 . 255 . 255 . 0
192 .168 . 1 . 1
Gateway
Modify
Name：
admin
Password：
Stream Type：
1920x1080 25fps
Language：
English
Remember me
Login