Miele DA 289 Инструкции по эксплуатации и установке - Страница 15

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и установке для Вентиляционная вытяжка Miele DA 289. Miele DA 289 32 страницы. Decorator wall hood accessory shelving unit
Также для Miele DA 289: Размеры изделия (2 страниц), Размеры изделия (2 страниц), Руководство по эксплуатации и установке (36 страниц)

Miele DA 289 Инструкции по эксплуатации и установке
Before any cleaning or maintenance
work disconnect the cooker hood
from the mains supply. Ensure that:
– it is switched off at the wall socket
and the plug removed (do not pull
on the cable, only on the plug), or
– the fuse is withdrawn from the
fused spur connection unit, or
– the mains fuse is withdrawn, or
– the screw-out fuse is removed (in
countries where this is applicable).

Housing

Warning: The surfaces and controls
are susceptible to scratches and
abrasion. Please observe the follow-
ing cleaning instructions.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
Part Number 98013530, which is suit-
able for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals. It
can be washed 300 times.
^ All external surfaces and controls can
be cleaned using warm water with a
little washing up liquid applied with a
well wrung out soft sponge or cloth.
^ Wipe the surfaces dry using a soft cloth.
Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
^ Glass surfaces can be cleaned using
a proprietary cleaning agent for glass.

Cleaning and care

Avoid:
– cleaning agents containing soda, ac-
ids or chlorides,
– abrasive cleaning agents, e.g. pow-
der cleaners or cream cleaners and
abrasive sponges, e.g. pot scourers
or sponges which have been used
previously with abrasive cleaning
agents.
These will damage the surface material.
Stainless steel surfaces
Stainless steel surfaces can be cleaned
using a proprietary non-abrasive clean-
ing agent designed specifically for use
on stainless steel.
To help prevent re-soiling, proprietary
conditioning agents for stainless steel
can also be used. Apply sparingly with
an even pressure following the direction
of the grain.
Stainless steel coloured controls
The controls may suffer discolour-
ation or damage if soiling is left on
them for too long.
Remove any soiling straight away.
Do not use stainless steel cleaning
agents on the controls.
If you are unsure about a particular
product or need further advice please
contact your nearest Miele Sales of-
fice. See back page for address.
15