Miele DA 289 Инструкции по эксплуатации и установке - Страница 17
Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и установке для Вентиляционная вытяжка Miele DA 289. Miele DA 289 32 страницы. Decorator wall hood accessory shelving unit
Также для Miele DA 289: Размеры изделия (2 страниц), Размеры изделия (2 страниц), Руководство по эксплуатации и установке (36 страниц)
^ Clean the filter
– by hand: with a soft nylon brush,
warm water and a little washing up
liquid.
– in a dishwasher: place the filter
with the short side upright in the
lower basket, ensuring the spray arm
is not obstructed.
Depending on the cleaning agent
used, cleaning the grease filter in a
dishwasher can cause permanent
discolouration to the surface.
However, this will not affect the func-
tioning of the grease filter in any way.
^ After cleaning, leave the filter to dry
for a while on an absorbent surface
before putting it back in place.
^ When cleaning the vapour plate,
please follow the instructions given
under "Housing" earlier in this sec-
tion.
^ With the vapour plate and grease fil-
ter removed, clean off any residues of
oil or fat from the now accessible
housing and channel on the lower
housing to prevent the risk of these
catching fire.
^ After replacing the vapour plate and
grease filter press the grease filter
touch control for approx. 3 seconds
to re-set the operating hours counter.
The indicator lamp will go out.
^ If the vapour plate and grease filter
are cleaned before the operating
hours counter has reached its maxi-
mum, the grease filter touch control
should be pressed for approx. 6 sec-
onds to reset the counter to zero.
Cleaning and care
^ Push the grease filter into position un-
til it engages.
^ Hook the vapour plate into the bottom
of the housing, push it slightly to the
left and then raise it up towards the
appliance and click it into position.
17