Miele DDG 102 Руководство по установке - Страница 16

Просмотреть онлайн или скачать pdf Руководство по установке для Вентиляционная вытяжка Miele DDG 102. Miele DDG 102 28 страниц. External motor roof installation
Также для Miele DDG 102: Руководство по эксплуатации и установке (24 страниц), Инструкции по эксплуатации и установке (28 страниц), Руководство по установке (28 страниц)

Installation

 Remove the roofing around the

installation area.

 Bend the flashing  upwards.

 Position the motor unit on the roof

with the air outlet directed down the

roof.

 Secure the motor unit to the roof

substructure with the fixing plate .

 Replace the roofing. Press down on

the flashing to ensure that it creates a

proper seal.

The flashing should be fitted under

the roofing at the top of the motor

unit and above the roofing at the

sides and bottom of the motor unit.

 If equipotential bonding is required,

connect the earth lead to the earthed

connection point  in the housing.

Equipotential bonding is required if

the control cable is to be extended

by more than the length of the

extension cable supplied (see

"Electrical connection").

 Push the flexible ducting onto the

connection on the motor unit and

secure it with a hose clip.

 Connect the control cable plug

connectors.

 Use the extension cable supplied to

lengthen the control cable if

necessary.

When feeding the cable and the

exhaust ducting through the

substructure of the roof, be careful to

ensure that any gaps are sealed

properly afterwards.