Miele DDG 102 Руководство по установке - Страница 18

Просмотреть онлайн или скачать pdf Руководство по установке для Вентиляционная вытяжка Miele DDG 102. Miele DDG 102 28 страниц. External motor roof installation
Также для Miele DDG 102: Руководство по эксплуатации и установке (24 страниц), Инструкции по эксплуатации и установке (28 страниц), Руководство по установке (28 страниц)

Installation

The ducting collar on the motor unit has

a diameter of 150 mm as standard.

If a diameter of 125 mm is required a

reducing collar must be used.

A reducing collar is available to order

from Miele or from your Miele supplier.

 Push the flexible ducting onto the

connection on the motor unit and

secure it with a hose clip.

 Ducting with a diameter of 150 mm is

then connected to the exhaust side.

If the exhaust air is to be ducted into

the open air, a telescopic wall vent kit

can be used. A telescopic wall vent kit

is available to order from Miele or from

your Miele supplier.

If the motor is installed vertically with

the exhaust ducting venting over a

roof, a roof vent kit DDF 125/150 or

similar measures must be used to

prevent the elements such as

rainwater or snow penetrating the

exhaust opening.

 Connect the control cable plug

connectors.

 Use the extension cable supplied to

lengthen the connection cable if

necessary.

 If equipotential bonding is required,

connect the earth cable to the

connection point provided  on the

casing.

Equipotential bonding is required if

the control cable is to be extended

by more than the length of the

extension cable supplied (see

"Electrical connection").