Allo.com PSTN / VoIP PBX Руководство по быстрой установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Шлюз Allo.com PSTN / VoIP PBX. Allo.com PSTN / VoIP PBX 11 страниц.

PSTN/VoIP PBX

Hardware Setup

1. Unpack your PSTN/VOIP PBX and make sure you received everything.

Each box contains: PSTN/VOIP PBX -1 No

AC adapter (120V-220V) + 2 wall plugs (EU & US) -1 No

Ethernet cable and Serial Cable -1 No

2. Plug in your PSTN/VOIP PBX LAN port to your PC using the network cable

provided

3. Plug the power cable to the PSTN/VoIP PBX. After 10 secs, all the 6 LEDs

start blinking and LEDs turn to orange after the completion of boot up.

4. Check your PC network settings and make sure you have enabled the DHCP

5. Use following IP address in web browser to start the configuration process:

192.168.113.1:8088

6. Factory default login credentials are:

Username: admin/Password: admin

Important Note:

We strongly recommend you change these to reduce the possibility of a security breach.

Quick Installation Guide v2.1