Allo.com PSTN / VoIP PBX 빠른 설치 매뉴얼 - 페이지 4

{카테고리_이름} Allo.com PSTN / VoIP PBX에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allo.com PSTN / VoIP PBX 11 페이지.

PSTN/VoIP PBX

Hardware Setup

1. Unpack your PSTN/VOIP PBX and make sure you received everything.

Each box contains: PSTN/VOIP PBX -1 No

AC adapter (120V-220V) + 2 wall plugs (EU & US) -1 No

Ethernet cable and Serial Cable -1 No

2. Plug in your PSTN/VOIP PBX LAN port to your PC using the network cable

provided

3. Plug the power cable to the PSTN/VoIP PBX. After 10 secs, all the 6 LEDs

start blinking and LEDs turn to orange after the completion of boot up.

4. Check your PC network settings and make sure you have enabled the DHCP

5. Use following IP address in web browser to start the configuration process:

192.168.113.1:8088

6. Factory default login credentials are:

Username: admin/Password: admin

Important Note:

We strongly recommend you change these to reduce the possibility of a security breach.

Quick Installation Guide v2.1