Diamond EFP/66R-M Руководство по эксплуатации, использованию и техническому обслуживанию - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации, использованию и техническому обслуживанию для Печь Diamond EFP/66R-M. Diamond EFP/66R-M 12 страниц. Electric oven
Также для Diamond EFP/66R-M: Руководство по эксплуатации, использованию и техническому обслуживанию (12 страниц)

4 INSTALLATION

Unloading and moving the oven must be done by qualified

personnel with a forklift.

Installation of the oven must be done by qualified personnel

and in accordance with local, national and European

regulations.

Ensure that the supporting surface of the oven is level and

has an adequate supporting load capacity.

After removing the oven from the special casing, place it

where planned taking into account the minimum safety

distances from walls and/or other equipment.

To make sure that the machine is well ventilated the

minimum distance from walls and/or other equipment must

not be lower than 10 cm to the left and rear sides.

Keep a minimum distance of 20 cm for air to pass on the

right side, where possible at least 50 cm in order to be able

to easily access the electrical system for any maintenance

and/or repair work.

Remove any polystyrene protection and take off the protective film avoiding the use of tools that can damage the

surfaces.

REMOVE THE POLYSTYRENE FROM UNDER THE STONES BEFORE SWITCHING THE OVEN ON.