Aquasana OptimH2O EQ-OPTM Руководство по установке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по установке для Системы фильтрации воды Aquasana OptimH2O EQ-OPTM. Aquasana OptimH2O EQ-OPTM 12 страниц. Whole house water filter
Печатать страницу
System Installation
—Step 1—
Install part
into
G
the threaded connection
& thread tape.
HAND TIGHTEN ONLY
—Step 2—
Connect
to
D
Meter Assembly (has wire) should be
placed on the Outlet Side (right side).
Note flow direction arrow on meter body.
HAND TIGHTEN ONLY
—Step 3—
Connect
Bypass to
E
HAND TIGHTEN ONLY
—Step 4—
Connect
to
. Use the part that's
F
E
best for your plumbing system.
Filter cartridge is fragile,
handle with care.
HAND TIGHTEN ONLY
—Step 5—
Connect
to
C
bottom of the Filter Housing
HAND TIGHTEN ONLY
Plugged fitting should be installed
on the right side.
—Step 6—
Connect 3⁄ ₈ " PEX Plumbing to Drain
Valve
NOT PROVIDED
—Step 7—
Install 3 AAA batteries
to
Umbrella Cap;
H
connect to Power Supply.
Contents
Filter housing
A
Bottom Inlet/Outlet cap assembly
B
Vertical elbow
C
Flow Meter Assembly
D
Notes
Allow four feet of open space above the system for replacement cartridges. 3 AAA batteries not included.
using
C
; Flow
C
NOTE: Flow direction arrows on bypass
.
D
on the
B
.
A
.
G
INLET
OUTLET
are incorrect for this filter application.
Plumb unit opposite of arrows.
E
D
USE THREAD TAPE
Do Not Overtighten
DRAIN VALVE
G
Bypass manifold
E
Straight or 90° Angled In/Out 1" MNPT connectors
F
3⁄ ₈ " PEX Drain valve assembly with shut-off
G
Umbrella Cap with PCB assembly and battery backup
H
NOT SHOWN: Power Supply
To Power Supply
F
Flow Meter should be
placed on the outlet
C
side (right side).
Note: the flow direction
arrow on the meter body.
H
A
B