Aquasana OptimH2O EQ-OPTM Руководство по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке для Системы фильтрации воды Aquasana OptimH2O EQ-OPTM. Aquasana OptimH2O EQ-OPTM 12 страниц. Whole house water filter
Печатать страницу
3
5
8
10
3. Remove the top cap from the housing
assembly. Pull the cap out of the top of
the tank by lifting up on the handles.
4. Look down into the tank. You should
see a small opening centered in the
bottom of the tank.
5. Remove packaging from the filter
cartridge. Place the filter cartridge into
the tank with the double O-ring facing
down.
6. Position the cartridge so that it is
aligned with the bottom, center
opening.
7. Press down on the cartridge so that the
double O-ring seal moves into place
within the bottom, center opening.
8. Reposition the top cap into its original
location.
9. Reattach top tank snap ring. Pull up on
the top cap to seat the O-rings.
10. Relieve the system of air in the tank as
the system fills with water, by pushing
down on the red depressurization
button on the top cap of the system.
Keep the button pushed down until all
the air pressure is completely released,
and water comes out of the red
depressurization button. Release the
red depressurization button.
11. Run water through system for 10
minutes before use.
4
7
9