3Built RES12VX Руководство - Страница 5

Просмотреть онлайн или скачать pdf Руководство для Приемник 3Built RES12VX. 3Built RES12VX 5 страниц.

PROGRAMMING

1) Disconnect power from the Receiver for 30 seconds.

2) Have the new Transmitter (white) and the Programming Transmitter (black) ready. They

will both be used within a few seconds once power is applied to the Receiver.

3) Apply power to the Receiver (1 beep) and continue to next step within 5 seconds.

4) Press and hold the LOCK button on the Programming Transmitter. Within a few seconds

the Receiver will emit one beep. Let go of the LOCK button and continue to the next step

within 5 seconds.

5) Press the "Lock" button on the new Transmitter. The receiver will emit three beeps to

confirm programming.

6) Repeat step 5 if more than one Transmitter is being programmed.

7) Disconnect the power to the Receiver for a few seconds.

8) Connect power to the Receiver and test new Transmitter function.

ERASE RECEIVER

3) The Receiver's memory can be entirely erased by disconnecting power (30 seconds)

and reconnecting power to the Receiver.

4) Immediately after power is connected, press and hold the UNLOCK button on the

Programming Transmitter until the receiver emit five beeps to confirm complete deletion

of all transmitter programming.

Receivers with a "U" in the

part number

(for example: RES12VU, RES6VU-B,

RES12VUE)

Page 5 of 5

6/28/16