Diamond H2O Reliant DRS4-EM-66 Руководство - Страница 9
Просмотреть онлайн или скачать pdf Руководство для Диспенсер для воды Diamond H2O Reliant DRS4-EM-66. Diamond H2O Reliant DRS4-EM-66 19 страниц. Reliant drs4 series single tank water softener
Печатать страницу- 1. Table of Contents
- 2. Place the Tanks Near a Water Source
- 3. Setting up the Tank
- 4. Connect the Brine Tank
- 5. Connect the Valves to the Water Source
- 6. Electrical
- 7. Start up the System for the First Time
- 8. Bypass Valve Operations
- 9. Main Operating States
- 10. Program the Valve
- 11. Troubleshooting
- 12. System Specifications
- 13. Error Codes
Key:
Hard Water
Soft Water
Salinized Water
Resin
Regenerate Fill:
Water is sent to the
Brine Tank to create
regenerant for next
regeneration cycle.
Removes any residual regenerant from
resin bed. (Water travels through the
resin bed and up the riser tube drain).
Figure 20: General Softener Operations
Service/Operation
Fast Rinse:
Backwash:
Flow reversed to
flush debris from
resin bed to drain.
Second Backwash:
Flow reversed to flush
debris from resin bed to
drain.
Regenerant Draw/ Slow
Rinse:
After one Tank's Resin Bed is
exhausted, Regenerate is
drawn from Brine Tank
through Brine Line Valve to
Resin Bed. Hardness ions are
then replaced by sodium
ions, preparing Resin for
another treatment cycle. The
Regenerate flows through
resin (at a specific rate) to
exchange ions. Resin is now
'Regenerated' and ready for
another cycle.
pg. 8