HP 1420-16G Руководство по началу работы - Страница 10

Просмотреть онлайн или скачать pdf Руководство по началу работы для Переключатель HP 1420-16G. HP 1420-16G 23 страницы.

Figure 7 Hole spacing

Insert one wall anchor into each hole until the anchors are flush with the wall surface.

Drive one screw into each wall anchor, and tighten the screws just enough to keep it secure in the

wall anchor.

Leave a minimum clearance of 1.5 mm (0.06 in) between the base of the screw head and the wall

anchor so the switch can hang on the screws securely.

Figure 8 Driving a screw into a wall anchor

Align the two mounting holes in the switch chassis bottom with the two screws on the wall and

hang the switch.

Make sure the Ethernet ports are facing upwards or downwards and the chassis side panels are

perpendicular to the ground.

Figure 9 Wall mounting

(1) Mounting hole in the switch chassis bottom