AQUATECH LSM Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Переключатель AQUATECH LSM. AQUATECH LSM 12 страниц. Level switch
Печатать страницу
0.0 GENERAL SAFETY INFORMATION
These instructions are intended for the installer/operator/user/maintenance of this equipment
and must be kept with the equipment, for the life of the equipment and made available to all
persons. Please read GENERAL SAFETY INFORMATION 0.0, WARNINGS 0.1 and
CAUTIONS 0.2, 0.3 & 0.4 before doing anything else, and then follow them carefully.
The unit must only be installed/operated/used/maintained by a competent person; A
competent person is someone who is technically competent and familiar with safety practices
and the hazards involved.
Failure to install/operate/use/maintain the equipment as recommended below could cause
damage to the equipment any anything subsequently connected to it, and invalidate the
warranty provided by AquaTech-Pressmain to the buyer.
Any damage caused to the equipment by misapplication, mishandling or misuse could lead to
risk of Electrocution, Burns, Fire, Flooding or injury to people or property dependent
upon the circumstances involved.
This equipment automatically restarts after a power interruption.
We accept no responsibility or liability for any consequences or damage/losses due to
misapplication, mishandling or misuse of the equipment.
The latest version of this instruction manual with up to date safety information can be
downloaded from our website at www.aquatechpressmain.co.uk
0.1
WARNINGS
0.1.1 Do not touch any live parts for at least 5 minutes after switching off the electricity supply.
Failure to observe this will constitute a severe Electric shock and/or Burns hazard and
may be lethal.
0.1.2 The equipment is only suitable for earth referenced supplies and must be permanently
earthed to avoid Electric shock hazard.
0.1.3 With equipment isolator OFF, mains voltage may still be present from BMS system. This
constitutes an Electric shock hazard.
0.1.4 Some equipment is designed to operate with liquid temperatures up to 150 degrees
centigrade and will constitute a Burns/scalding hazard.
0.1.5 The equipment must not be pressurised beyond the maximum working pressure as
stated otherwise serious mechanical damage/destruction could occur causing injury to
people or property.
0.1.6 The equipment must not be heated/chilled beyond the maximum/minimum working
temperature as otherwise serious mechanical damage/destruction could occur causing
injury to people or property.
0.1.7 Any damage to equipment caused by misapplication, mishandling or misuse could lead
to Electric shock hazard, Burns hazard, Fire hazard, Flooding hazard or cause injury to
people or property.
0.2
CAUTIONS FOR INSTALLATION
0.2.1
READ GENERAL SAFETY INFORMATION 0.0, WARNINGS 0.1 and CAUTIONS 0.2, 0.3 & 0.4
0.2.2
The unit should only be installed/operated by a competent person; A competent person is
someone who is technically competent and familiar with safety practices and the hazards
involved.
0.2.3
Store in a dry place to avoid damp conditions deteriorating the equipment.
0.2.4
Protect against dirt, damage and frost. Frost/freezing will damage components.
Aquatech-Pressmain Limited Instruction manual\Liquid Level Switch LSM
Level Switch LSM
3