AQUATECH LSM Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik AQUATECH LSM. AQUATECH LSM 12 stron. Level switch

Drukuj stronę

0.0 GENERAL SAFETY INFORMATION

These instructions are intended for the installer/operator/user/maintenance of this equipment

and must be kept with the equipment, for the life of the equipment and made available to all

persons. Please read GENERAL SAFETY INFORMATION 0.0, WARNINGS 0.1 and

CAUTIONS 0.2, 0.3 & 0.4 before doing anything else, and then follow them carefully.

The unit must only be installed/operated/used/maintained by a competent person; A

competent person is someone who is technically competent and familiar with safety practices

and the hazards involved.

Failure to install/operate/use/maintain the equipment as recommended below could cause

damage to the equipment any anything subsequently connected to it, and invalidate the

warranty provided by AquaTech-Pressmain to the buyer.

Any damage caused to the equipment by misapplication, mishandling or misuse could lead to

risk of Electrocution, Burns, Fire, Flooding or injury to people or property dependent

upon the circumstances involved.

This equipment automatically restarts after a power interruption.

We accept no responsibility or liability for any consequences or damage/losses due to

misapplication, mishandling or misuse of the equipment.

The latest version of this instruction manual with up to date safety information can be

downloaded from our website at www.aquatechpressmain.co.uk

0.1

WARNINGS

0.1.1 Do not touch any live parts for at least 5 minutes after switching off the electricity supply.

Failure to observe this will constitute a severe Electric shock and/or Burns hazard and

may be lethal.

0.1.2 The equipment is only suitable for earth referenced supplies and must be permanently

earthed to avoid Electric shock hazard.

0.1.3 With equipment isolator OFF, mains voltage may still be present from BMS system. This

constitutes an Electric shock hazard.

0.1.4 Some equipment is designed to operate with liquid temperatures up to 150 degrees

centigrade and will constitute a Burns/scalding hazard.

0.1.5 The equipment must not be pressurised beyond the maximum working pressure as

stated otherwise serious mechanical damage/destruction could occur causing injury to

people or property.

0.1.6 The equipment must not be heated/chilled beyond the maximum/minimum working

temperature as otherwise serious mechanical damage/destruction could occur causing

injury to people or property.

0.1.7 Any damage to equipment caused by misapplication, mishandling or misuse could lead

to Electric shock hazard, Burns hazard, Fire hazard, Flooding hazard or cause injury to

people or property.

0.2

CAUTIONS FOR INSTALLATION

0.2.1

READ GENERAL SAFETY INFORMATION 0.0, WARNINGS 0.1 and CAUTIONS 0.2, 0.3 & 0.4

0.2.2

The unit should only be installed/operated by a competent person; A competent person is

someone who is technically competent and familiar with safety practices and the hazards

involved.

0.2.3

Store in a dry place to avoid damp conditions deteriorating the equipment.

0.2.4

Protect against dirt, damage and frost. Frost/freezing will damage components.

Aquatech-Pressmain Limited Instruction manual\Liquid Level Switch LSM

Level Switch LSM