aquatechnik BCB 110 Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Инструменты aquatechnik BCB 110. aquatechnik BCB 110 12 страниц. Coupling tool

WARNINGS

•

The Coupling Tool BCB 110 is supplied with a pair of reusable elastomer expanders for each

processing diameter, from ø 40 to 90 mm. After about 5-10 flarings, depending on the dia-

meter, the elastomer expander may struggle to enter into the pipe due to excessive expan-

sion.This does NOT mean that it is exhausted: the elastomer expander returns to its original

shape after a rest period depending on the working temperature. In the meantime, set the

machine out of work and replace the elastomer with the supplied second one, to proceed

working.

•

At temperatures closed to 0°C, the return time of the expander can be considerably longer.

•

Discard the elastomer only in case of breakage or if it doesn't go back to its initial shape

after the rest period.

MAINTENANCE

• In order to clean the equipment, use a cloth slightly soacked with a common, non aggres-

sive detergent. DO NOT USE acid substances, thinners, solvents, and powdered products

which may damage its components.

• The BCB 110 Tool is equipped with a display that warns, both acoustically and visually, of

the approaching scheduled maintenance time. The periodic check is necessary to preserve

the good functioning of the equipment.

• Any servicing work on the Coupling Tool BCB 110 shall be performed at Aquatechnik me-

chanical dept. Any alteration of the equipment or its components involve the cancellation of

the warranty.

• In case of consistent loss of oil from the equipment, send immediately the Coupling Tool

BCB 110 to Aquatechnik mechanical dept. for subsequent inspection and repairing. (War-

ning: avoid that leaked oil comes into contact with the eyes or skin. Do not inhale or ingest.

Do not disperse into the environment).

• Avoid that the equipment get wet; water and liquids in general can damage the electrical

circuits.

• Warning: During maintenance operations, make sure that the equipment is disconnected

from power sources (battery).