Diamond Way K-Kub Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Напольная машина Diamond Way K-Kub. Diamond Way K-Kub 7 страниц. Single phase floor grinder
Печатать страницуTechnical Data
Motor HP
Motor KW Rating
Motor RPM
Unit Weight
Plate Type
Plate Bolt Types
Main Construction
Ensure all re-tipped and new grinding plates are properly balanced.
Operation
The K-Kub is designed to be used either for wet or dry floor grinding. If the
floor that has to be ground is dry ensure a suitable industrial vacuum is
connected and also ensure the operator is wearing suitable breathing
respiratory equipment. Contact your local work place health authority to
ensure that their requirements regarding respiratory equipment are being
met.
Starting the Grinder
1. Check the grinding plate being used is suitable for the material being
ground and THAT THEY ARE CORRECTLY BALANCED.
2. Check that the grinding plates used are in good order and are properly
attached, with all countersunk bolts firmly in place. Check this
occasionally during use, as they can become loose during working.
3. Check that the grinding plate is adjusted so that it sits level on the
ground.
4. Check all nuts and bolts on folding handle latch are tight and firm.
5. Raise the grinding plates from the floor.
6. Start the motor by pressing the Green switch on the starter box.
7. Lower the grinding plate and commence grinding.
Standard 250mm plate or K-Kub
M12x25 countersunk socket bolts
M8 x 16 mm Hex head engineers bolt
3 HP
2.2 kW
1450 rpm
45 kg
shoes
Powder coated steel
4 |
P a g e