Diamond Way K-Kub Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Напольная машина Diamond Way K-Kub. Diamond Way K-Kub 7 страниц. Single phase floor grinder
Печатать страницуStopping the grinder
1. De-press the red stop button on the starter box.
Safety Precautions
The K-Kub floor grinder has been designed to minimise noise and vibration
levels and to provide maximum safety to the operator. However, incorrect use
of the grinder may cause serious injury to the operator hence the following
precautions must be taken.
1. Do not use the grinder for longer than prescribed in your local
environment working regulations, as the noise load from extensive daily
use may result in hearing defects.
2. Always use protective earplugs or earmuffs, goggles, gloves and
protective footwear.
3. Do not modify the grinder in any manner, or use a machine that has
been modified by anyone other than the manufacturer or authorised
dealers.
4. Do not add weight to the machine to make the grinder work harder.
Instead reduce the number of segments on the grinding plates to
increase the performance.
5. Make sure that re-tipped plates and new grinding plates are balanced
properly.
6. Do not run the grinder with the grinding head raised higher than
necessary, i.e. tipped back on the handle.
7. Always make sure that the folding handle latch is secure and has not
vibrated loose after use.
8. When grinding the machine is exposed to high vibration. Occasionally
check the machine if any nut or bolt has loosened due to the vibration.
9. Do not allow water or cotton to enter the interior of the motor.
Fault Diagnosis
Symptom
Grinder runs for 5 – 15
minutes, then stops
Possible Cause
Motor thermal overload
tripped
Extension cable too long
and/or not made from
Action
Allow to cool, reset
thermal overloads
Then get electrician to
check extension lead
5 |
P a g e