Panasonic SCPM11 - CD STEREO SYSTEM Руководство по эксплуатации - Страница 13
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стереосистема Panasonic SCPM11 - CD STEREO SYSTEM. Panasonic SCPM11 - CD STEREO SYSTEM 28 страниц. Panasonic cd stereo system operating instructions
Также для Panasonic SCPM11 - CD STEREO SYSTEM: Руководство по эксплуатации (29 страниц), Руководство по эксплуатации (32 страниц), Руководство по эксплуатации (28 страниц)
Печатать страницу
4
2
1
2
3
4
Specified disc number
5
7
A
B
Indicates program mode
3
5
7
1
CLEAR
PRGM
Specified track number
Program order
Listening to compact discs
Program play
by remote control only
You can program up to 24 tracks.
Press [SELECTOR] to select "CD".
Every time you press the button:
CD → TAPE → TUNER → AUX
↑
Press [PROGRAM].
Press [DISC].
(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
Press the numeric button to select the desired track.
Repeat steps 3 through 5 until you have pro-
grammed all the tracks you want.
Press [CD -
- - /J].
- -
Play will start in the programmed sequence.
To cancel program play mode
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
Pressing [L CLEAR] will cancel program play, but it will also erase the
entire program.
To select a two-digit track
Press [≥10] and then the two numbers you want.
A
When "CD FULL" appears
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
B
You can do the following during program mode
•
Check program contents.
Press [g] or [f].
Every time you press one of the buttons, the track and program No.
are shown on the display.
•
Add to the program.
Repeat steps 3 through 5.
•
Cancel entries.
From the last
Press [CANCEL].
programmed track
A specified track
Select the track with [g] or [f], and
only
press [CANCEL] within 3 seconds.
All tracks
Press [L CLEAR].
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
To replay your program
If you turned OFF your program with [PROGRAM], you can play it
again as explained below.
1. Press [PROGRAM].
2. Press [CD -/J].
If you program a track not on your CDs
The track is initially programmed, but during program play, the player
will skip that track and will continue playing from the next programmed
item.
13
RQT5706