Panasonic SCPM11 - CD STEREO SYSTEM Руководство по эксплуатации - Страница 15
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стереосистема Panasonic SCPM11 - CD STEREO SYSTEM. Panasonic SCPM11 - CD STEREO SYSTEM 28 страниц. Panasonic cd stereo system operating instructions
Также для Panasonic SCPM11 - CD STEREO SYSTEM: Руководство по эксплуатации (29 страниц), Руководство по эксплуатации (32 страниц), Руководство по эксплуатации (28 страниц)
![Panasonic SCPM11 - CD STEREO SYSTEM Руководство по эксплуатации](/uploads/products/server2/3945473/3945473.png)
1
3
1
TUNER/ BAND
2
TUNE MODE
3
/ REW /
/ FF/
4
VOLUME
DOWN
UP
A
TUNE
REW/3
CLEAR
FF/4
MODE
FM MODE/BP
MUTING FM MODE/BP REV MODE
SOUND EQ
Listening to radio broadcasts
Press [TUNER/BAND] to select "FM" or "AM".
The unit comes on automatically.
Every time you press the button:
FM G AM
Press [TUNE MODE] to select "MANUAL".
Every time you press the button:
MANUAL G PRESET.
Press [g/REW/3] or [4/FF/f] to select the
4
frequency of the required station.
"TUNED" is displayed when a radio station is tuned.
"ST" is displayed when a stereo FM broadcast is being received.
2
Adjust the volume.
Auto tuning
Press and hold [g/REW/3] or [4/FF/f] for a moment until the
frequency starts changing rapidly. The unit begins auto tuning, stopping
when it finds a station.
•
Auto tuning may not function when there is excessive interference.
•
To cancel auto tuning, press [g/REW/3] or [4/FF/f] once
again.
If noise is excessive in FM
A
by remote control only
Press [FM MODE/BP] to display "MONO".
This mode improves sound quality if reception is weak, but broadcasts
will be heard in monaural.
Press [FM MODE/BP] again to cancel the mode.
"MONO" goes out. MONO is also canceled if the frequency is changed.
Turn off "MONO" for normal listening. Stereo and monaural broad-
casts are automatically played as they are received.
FM allocation setting
TUNED
By adjusting the allocation, you can enable this tuner to receive FM
broadcasts allocated in 0.1 MHz steps.
ST
Press and hold [TUNER/BAND]. After a few seconds, the display will
change to a flashing display of the current minimum FM frequency.
If you continue to hold the button down, the minimum frequency will
change. Release the button at this time.
To return to the original frequency indication, repeat above.
dB
Note
•
After changing the "allocation" setting, the frequencies you previously
preset in the memory will be cleared.
•
Sound is momentarily interrupted if you load/unload tapes while
listening to an AM broadcast.
TUNED
MONO
15
RQT5706